Tips For Replacing a Window Handle
It is simple to change your window handle in the at-home comforts of your home. Follow these guidelines to ensure an elegant and smooth finish.
Begin by removing the screws to reveal the screws within the uPVC window handle. Take a measurement of the spindle to be sure you're getting the correct size replacement.
1. Take a measurement of the Spindle Length
It's important that you ensure the correct size of the spindle when replacing a window handle. It can influence the tightness or looseness of the handle, as well as whether the handle will lock properly into the window frame. The spindle is a metal shaft that connects the handle and to the lock inside the window frame. The spindle can be found in the standard 8mm cross-section for industry or the older versions that measure 9mm. The current industry standard is 8mm, but this wasn't always the case, so when buying a new handle it's essential to check the dimensions.
The easiest way to measure the spindle length is to take off the handle you have already installed and this can be done by turning it to the open position and then removing the two screws (which may be hidden behind plastic caps that have to be removed) that retain the handle. After removal, you can measure from the base of the handle to the end of the spindle. This will give you the measurements needed to buy a new one.
There are many options to consider when choosing a new window handle from sleek chrome that can fit into modern homes to traditional brass that looks stunning in restored Georgian rooms, or even the more quaint Tudor cottages with curled monkey tail latches! The options are endless but the most important thing to do is select a style that is suitable for your home.
Espag handles are usually installed to uPVC windows and are identical in size with 43mm centers (2 fixings). Cockspur handles can vary between 58mm and 62mm however there are replacements for both sizes. Window handles made of Cadenza are different in size as they have an angled blade that functions with a multi-point locking mechanism within the window.
Another factor when choosing the right window handle is determining what hand you will need, this is simply defined by the hand you use to open the door. Inline Espag handles can be used with either left or right-handed windows. Cranked window handles are handed and can only be used on windows that open in one direction.
2. Remove the Handle
The handle may be damaged or simply worn out the handle of a window that is shattered is a major source of frustration. The good part is that replacing the uPVC window handle is a very easy job that you can do yourself. You only need the most basic hand tools as well as some time to complete the task.
The first step is to need to open the window and ensure that it is in the unlocked position. Then, you need to remove the screws that hold the handle in place. Once the screw caps have been removed, you will be able to remove the handle.
The handle itself is fixed to a spindle inside the window frame. It is held in place by either a screw or pin, depending on the type of handle. The most popular handles are the inline Espagnolette and the cockspur handles. Both of these kinds of handles are employed on casement windows, which includes aluminium windows. The handles can be locked by using a key to stop unauthorised access from the outside. Or you can lock the handles by turning them clockwise.
To take the handle off, you will need to use an screwdriver with a flat blade in order to remove the clip that holds the handle in place. Once the clip is released, the handle should be able to slide off the spindle. Once the handle that was previously used has been removed, you'll have to take a measurement of the length of the spindle to make sure that the new handle is a good fit.
Once you have determined the correct size for the handle, screw it into place. You must ensure that the new handle is firmly attached and that it turns the correct way (clockwise for open and counterclockwise for closed). It is also important to check that it has not been fitted upside down.
Finally, you should replace the screw cap caps. After you have completed this step, you can test the handle to make sure it is working correctly. You can also test the locking mechanism by shifting the handle from the unlocked position to the locked position and back.
3. Take off the Screws
A uPVC window handle is a crucial element of any home and is often the first thing to show signs of wear and wear or damage. This can be caused by natural factors or through regular use, or intentional damage caused by criminals who may wish to open a locked window to gain access to your home. A simple repair can fix the problem and prevent it from repeating itself.
UPVC handles can also be difficult to remove when the locking mechanisms are not working properly. It's often possible to solve the problem by replacing the multipoint locking mechanism rather than the whole handle. This can help you save money.
After you've removed the old handle, you will need to remove any screws that were holding it in place. They're usually on the inside of the base of the handle. You may require a screwdriver for this and it's essential that you don't over tighten the screw as this could cause the handle to become loose.
Then, you'll have to locate the screws or pins that secure the handle. These are usually located on the inside of the base of the handle. You'll need a screwdriver to remove them. After you have removed them, you'll be required to replace the screw caps in the event that you want to do so, and then test the new handle to make sure it's working properly.
Install the handle by aligning the spindle with the window's cutout mechanism. Then, screw it in. Make sure the handle is in the open position and that any screws are tightly fixed before replacing the screws' covers, if you wished to do this. Once you've completed this, you're all done and you are able to enjoy your new window handle. We hope this will allow you avoid the need for expensive window and door replacement services in the future. Contact us if need more information on this or any aspect of your uPVC window.
4. Fit the New Handle
The procedure of replacing a damaged window handle or updating it is simple and can be completed within only a few simple steps. The most important thing is to identify the type of handle, take measurements of its spindle and know what tools you will need to complete the task. Always ensure safety when working with windows and tools. It's also important to take your time and follow the steps to ensure that you have a functional handle that is safe to use.
To begin, find the screws that hold your window handle. Remove door handles while firmly holding the handle to stop it from falling and causing injury. Once the screws are removed, you can put them in a secure location to be replaced in the future.
Once the old handle is removed, you are now able to begin to install your new handle. The handle should be fitted perfectly to function properly and hold the window in its closed position. Then you need to slide the square metal bar attached to the handle into the window mechanism hole.
After the new handle is installed, the final thing to do is to replace the caps on the screws and check to see if it works. If you're not satisfied with the result or if the window doesn't open and close as it should then the next step is to call our experts who will be able to assist you.
The majority of UK homes are equipped with uPVC Windows. Therefore, a large number of windows will require replacement at some point because of wear and tear or breakage. Anyone with some DIY knowledge can accomplish the task. It is essential that the handle you select is in line with the style and size of the window. If you're not sure what type of handle you require, please contact our team who will be able to help you navigate the various choices available.